Tiles4Less is delighted to be offering a new range of environmentally aware Sealers and Cleaners. Easy to add to any order of Carrara or Pietre Grey Marble or our Encaustic Cement tiles, or simply purchase alone.
These products really do need to be sealed and most of us would prefer to do this in the most environmentally friendly way possible. We are delighted to be teaming up with Aquamix with their huge experience in the business and our synergy of ideas.
Stone, Tile & Grout Sealers - The advantages of most Aqua Mix® Stone, Tile & Grout Sealers are: They’re safe water-based products that are utilising the latest in sealer technology. Most emit low or no VOCs (Volatile Organic Compounds), and prevent a variety of stains – both oil and water-based. Allow MVT (Moisture Vapour Transmission).
Stone, Tile & Grout Cleaners - The advantages of Aqua Mix® Stone, Tile & Grout Cleaners are: They’re specifically designed to be part of the perfect routine or heavy-duty cleaning solution for any natural stone, tile or grout surface. Aqua Mix® Stone, Tile & Grout Cleaners are non-acidic and won’t damage your natural stone, tile or grout. They are also designed to break down quickly and naturally in the environment
Sealer’s Choice® Gold – Rapid Cure is a premium grade, high performance penetrating / impregnating stone, tile & grout sealer. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone, tile & grout surfaces. This premium sealer also includes built-in Microban® – Cured Sealant is Mould & Mildew Resistant, and this sealer lasts up to 15 years.
Key Features:
- Maximum stain protection
- May be used as a pre-grouting sealer
- Allows moisture vapour transmission
- The NEW Rapid Cure Formula protects in less than 4 hours
- Now with built-in Microban® – Cured Sealant is Mould & Mildew Resistant
- Safe to use, water-based low VOC formula
- Does not alter the slip resistance of the sealed surface
- Designed to achieve optimal penetration into dense, low-porosity surfaces
- Last up to 15 years
Suitable for use:
As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.
Limitations:
- Do not allow sealer to come in contact with any non-recommended surface.
- If the product is allowed to dry on the surface, a white film may form. If this occurs, scrub with Aqua Mix® NanoScrub® and a white nylon pad.
- The sealer will not prevent surface wear or etching from acids or caustic chemicals.
https://www.tiles4less.com.au/aqua-mix-sealers-choice-gold-946ml/
Aqua Mix® Concentrated Stone & Tile Cleaner is a super-concentrated routine cleaner formulated for everyday use. This pH neutral cleaner, when used regularly, prevents soap scum build-up and hard water deposits. Leaves a room smelling clean and fresh. The ideal cleaner for maintaining all natural stone, tile & grout surfaces.
Key Features:
- Ideal for everyday use
- Concentrated-makes up to 128 gallons (484 L) per 946ml
- Neutral pH formula
- Biodegradable formula
- Perfect for maintaining sealed stone & tile surfaces
For use on:
All polished & unpolished natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, grout, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other water-safe surfaces. Sealed & unsealed surfaces
Application of Product:
Read entire label before using. Sweep, vacuum, or dust surface. Mix 1 to 4 oz (30 to 118 mL) of Concentrated Stone & Tile Cleaner per gallon (3.8 L), of water.
For polished natural stone surfaces, 1 oz (30 mL) of Concentrated Stone & Tile Cleaner per gallon (3.8 L), of water is usually sufficient. Apply solution to surface with mop or sponge. Allow to dwell 1 to 2 minutes. Agitate with a natural-bristle brush or white nylon scrub pad. Do not allow solution to dry on surface. Mop up dirty solution. Change cleaning solution at least every 250 ft (25 M), or as needed.
https://www.tiles4less.com.au/aqua-mix-stone-and-tile-cleaner/